The Alumasc Skyline Aluminium Coping Fixing Strap is a key component of the Skyline coping system, designed to provide secure and reliable installation without penetrating the waterproof membrane. Manufactured from high-quality aluminium for strength and durability, these straps ensure that copings remain firmly in place while maintaining a clean, seamless external appearance.

Fixing straps are required at maximum 1500mm centres, or as advised by coping size and wind uplift calculations, to guarantee structural stability and performance.

Please note: Copings installed in excess of 10m above ground level, or on exposed sites, may require visible fixings due to increased wind loads.

Larger sizes and bespoke copings are available on request.

The Alumasc Skyline Aluminium Coping Tee Junctions provide a fully weatherproof solution for connecting coping sections at junction points, including 90° Tee Junctions as well as Left-Hand and Right-Hand Sloping Tee Junctions. Manufactured from strong, recyclable aluminium and finished with a durable polyester powder coating, they deliver long-term protection with a clean, contemporary appearance while avoiding penetration of the waterproof membrane.

Each Tee Junction is supplied with two fixing straps (typically one full and one half strap), with straps required at maximum 1500mm centres or as advised by coping size and wind uplift calculations. Copings SL12–SL36 are produced in 2mm aluminium, while SL42–SL60 are manufactured in 3mm aluminium for added strength.

Available in a mill finish or the standard palette of 26 RAL colours, with additional BS or RAL shades available to special order (subject to quantity and cost).

Please note: Copings installed above 10m, or on exposed sites, may require visible fixings due to increased wind loads. Images are for illustration purposes only and may not represent exact profiles or dimensions.

Larger sizes and bespoke copings are available on request.

The Alumasc Skyline Aluminium Coping Tee Junctions provide a fully weatherproof solution for connecting coping sections at junction points, including 90° Tee Junctions as well as Left-Hand and Right-Hand Sloping Tee Junctions. Manufactured from strong, recyclable aluminium and finished with a durable polyester powder coating, they deliver long-term protection with a clean, contemporary appearance while avoiding penetration of the waterproof membrane.

Each Tee Junction is supplied with two fixing straps (typically one full and one half strap), with straps required at maximum 1500mm centres or as advised by coping size and wind uplift calculations. Copings SL12–SL36 are produced in 2mm aluminium, while SL42–SL60 are manufactured in 3mm aluminium for added strength.

Available in a mill finish or the standard palette of 26 RAL colours, with additional BS or RAL shades available to special order (subject to quantity and cost).

Please note: Copings installed above 10m, or on exposed sites, may require visible fixings due to increased wind loads. Images are for illustration purposes only and may not represent exact profiles or dimensions.

Larger sizes and bespoke copings are available on request.

The Alumasc Skyline Aluminium Coping Tee Junctions provide a fully weatherproof solution for connecting coping sections at junction points, including 90° Tee Junctions as well as Left-Hand and Right-Hand Sloping Tee Junctions. Manufactured from strong, recyclable aluminium and finished with a durable polyester powder coating, they deliver long-term protection with a clean, contemporary appearance while avoiding penetration of the waterproof membrane.

Each Tee Junction is supplied with two fixing straps (typically one full and one half strap), with straps required at maximum 1500mm centres or as advised by coping size and wind uplift calculations. Copings SL12–SL36 are produced in 2mm aluminium, while SL42–SL60 are manufactured in 3mm aluminium for added strength.

Available in a mill finish or the standard palette of 26 RAL colours, with additional BS or RAL shades available to special order (subject to quantity and cost).

Please note: Copings installed above 10m, or on exposed sites, may require visible fixings due to increased wind loads. Images are for illustration purposes only and may not represent exact profiles or dimensions.

Larger sizes and bespoke copings are available on request.

The Alumasc Skyline Aluminium Coping Stop Ends provide a neat and fully weatherproof termination to parapet coping systems. Options include Closed Stop Ends (300mm length) as well as Left-Hand and Right-Hand Upstand Stop Ends with infill, allowing for a clean, professional finish on a variety of coping installations.

Manufactured from robust, recyclable aluminium and finished with a tough polyester powder coating, Skyline stop ends combine long-term durability with a contemporary appearance, while maintaining a fixing method that does not penetrate the waterproof membrane.

Each stop end is supplied with the appropriate fixing strap(s), with straps required at maximum 1500mm centres, or as advised by coping size and wind uplift calculations. Copings SL12–SL36 are produced in 2mm aluminium, while SL42–SL60 are manufactured from 3mm aluminium for added strength.

Available in a mill finish or the standard palette of 26 RAL colours, with additional BS or RAL shades available to special order (subject to quantity and cost).

Please note: Copings installed above 10m, or on exposed sites, may require visible fixings due to increased wind loads. Images are for illustration only and may not represent exact profiles or dimensions.

Larger sizes and bespoke copings are available on request.

The Alumasc Skyline Aluminium Coping Stop Ends provide a neat and fully weatherproof termination to parapet coping systems. Options include Closed Stop Ends (300mm length) as well as Left-Hand and Right-Hand Upstand Stop Ends with infill, allowing for a clean, professional finish on a variety of coping installations.

Manufactured from robust, recyclable aluminium and finished with a tough polyester powder coating, Skyline stop ends combine long-term durability with a contemporary appearance, while maintaining a fixing method that does not penetrate the waterproof membrane.

Each stop end is supplied with the appropriate fixing strap(s), with straps required at maximum 1500mm centres, or as advised by coping size and wind uplift calculations. Copings SL12–SL36 are produced in 2mm aluminium, while SL42–SL60 are manufactured from 3mm aluminium for added strength.

Available in a mill finish or the standard palette of 26 RAL colours, with additional BS or RAL shades available to special order (subject to quantity and cost).

Please note: Copings installed above 10m, or on exposed sites, may require visible fixings due to increased wind loads. Images are for illustration only and may not represent exact profiles or dimensions.

Larger sizes and bespoke copings are available on request.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 26 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Aluminium Column Casings provide a practical and durable solution for concealing structural elements such as steelwork, concrete, timber, and service ducts. Available in both Square and Semi-Square designs, they create a sharp, modern finish that enhances both internal and external architectural spaces.

Supplied in 3m standard lengths, the total installed height is approximately 3.4m including the top and bottom skirts. Each casing is supplied complete with outer casing, top and bottom skirt, and infill strip. Fixings and mullion brackets are not included and must be purchased separately.

Manufactured from strong, recyclable aluminium, Skyline column casings are supplied in a single unicolour finish as standard, with dual-colour options available on request at additional cost. The secret-fix design ensures a smooth, uninterrupted appearance while providing strength, durability, and low maintenance.

Suitable for both new build and refurbishment projects, Skyline column casings deliver a robust, ecological solution with long-term value.

Please note: Product images are for illustration purposes only and may not represent exact profiles or dimensions. Larger sizes and bespoke casings are available on request.

The Alumasc Skyline Aluminium Column Casing Infill and Inner Collar Kits are designed to complete the installation of Skyline column casings, providing a secure and visually seamless finish. Available in Circular, Semi-Circular, Square, and Semi-Square designs, these kits integrate effortlessly with the Skyline system to deliver a consistent architectural appearance.

Each kit is manufactured from strong, recyclable aluminium and finished with a durable polyester powder coating for long-lasting performance. Supplied in a unicolour finish as standard, dual-colour options are available to order on request at additional cost.

The Infill and Inner Collar Kits maintain the Skyline system’s signature secret-fix design, ensuring a smooth, uninterrupted look while delivering excellent durability and low maintenance. Suitable for both interior and exterior applications, they provide the ideal finishing touch for new build or refurbishment projects.

Please note: Product images are for illustration purposes only and may not represent exact profiles or dimensions. Larger sizes and bespoke options are available on request.

The Alumasc Skyline Aluminium Column Casings provide a practical and durable solution for concealing structural elements such as steelwork, concrete, timber, and service ducts. Available in both Square and Semi-Square designs, they create a sharp, modern finish that enhances both internal and external architectural spaces.

Supplied in 3m standard lengths, the total installed height is approximately 3.4m including the top and bottom skirts. Each casing is supplied complete with outer casing, top and bottom skirt, and infill strip. Fixings and mullion brackets are not included and must be purchased separately.

Manufactured from strong, recyclable aluminium, Skyline column casings are supplied in a single unicolour finish as standard, with dual-colour options available on request at additional cost. The secret-fix design ensures a smooth, uninterrupted appearance while providing strength, durability, and low maintenance.

Suitable for both new build and refurbishment projects, Skyline column casings deliver a robust, ecological solution with long-term value.

Please note: Product images are for illustration purposes only and may not represent exact profiles or dimensions. Larger sizes and bespoke casings are available on request.

The Alumasc Skyline Variable Coping range provides a weatherproof capping solution for parapet walls outside the standard coping size bands, made to suit wall widths from 0-400mm up to 1101-1250mm. Manufactured from strong, recyclable aluminium (2mm or 3mm gauge depending on width) and secured with a non-penetrative strap fixing system that keeps the coping face free of visible fixings while allowing ventilation over the wall. Finished with a tough polyester powder coating in a choice of 26 standard RAL colours, with additional BS or RAL shades available to special order (subject to quantity and cost).

Straight coping is supplied in 1m lengths; corners, T junctions, stop ends, reducers and radius sections are fabricated to suit your project. Fixing straps are included with lengths and also available separately for offcuts.

Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Aluminium Planters provide a modern and flexible solution for landscaping in both residential and commercial environments. Available in 400mm, 500mm, and 600mm depths, these planters combine contemporary style with long-lasting durability, making them an ideal choice for enhancing outdoor spaces.

Manufactured from high-quality aluminium, the Skyline planter range is lightweight, weatherproof, and maintenance free. The robust material offers excellent resistance to weathering and corrosion while remaining easy to handle and reposition, allowing for simple redesigns or layout changes.

Each planter features sharp, clean lines and a smooth finish, creating a sleek architectural aesthetic that complements any design scheme. Available in a wide choice of colours and sizes, the range provides flexibility to suit any project requirements and is perfect for showcasing plants in a stylish and functional way.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.