Aluminium Gutters Direct

Alumasc Skyline Fascia SF1 - 1 Bend

Shop by
manufacturer

Official supplier
4.9 across Google & Trustpilot BBA-certified powder coatings Manufacturer warranties on every range
Not sure which? Call the technical desk 0330 0539354
Alumasc Skyline Fascia SF1 - Apex/Raking Angles - Aluminium Gutters Direct
Alumasc
Alumasc Skyline - SF1 Fascia (1 Bend) Apex/Raking Angles
From £90.03 £113.25
-21%
In stock
Alumasc Skyline Fascia SF1 - 1 Bend x 3 Metre Length - Aluminium Gutters Direct
Alumasc
Alumasc Skyline - SF1 Fascia (1 Bend x 3m) Length
From £52.61 £66.17
-20%
In stock
Alumasc Skyline Fascia SF1 - 1 Bend x 2 Metre Length - Aluminium Gutters Direct
Alumasc
Alumasc Skyline - SF1 Fascia (1 Bend x 2m) Length
From £38.72 £48.70
-20%
In stock
Alumasc Skyline Fascia SF1 - Fascia Corner - Aluminium Gutters Direct
Alumasc
Alumasc Skyline - SF1 Fascia (1 Bend) Corner
From £35.09 £44.14
-21%
In stock
Alumasc Skyline Fascia SF1 - 1 Bend x 1 Metre Length - Aluminium Gutters Direct
Alumasc
Alumasc Skyline - SF1 Fascia (1 Bend x 1m) Length
From £24.80 £31.20
-21%
In stock
Alumasc Skyline Fascia SF1 - Loose Union - Aluminium Gutters Direct
Alumasc
Alumasc Skyline - SF1 Fascia (1 Bend) Loose Union
From £4.57 £5.75
-21%
In stock

ALUMASC SKYLINE FASCIA SF1 - 1 BEND · COMMON QUESTIONS

Something not answered here? The technical desk takes calls on 0330 0539354
When should I specify the SF1 (1-bend) fascia profile?
The SF1 fascia is a simple single-bend profile suited to minimalist designs and clean roof edges.
Can the SF1 fascia be curved or only straight?
SF1 profiles can be curved or straight, depending on the design and radius required.
What finish options are available for the SF1 fascia?
SF1 fascias can be supplied in any standard RAL colour and finish type.
What bracket options are available for SF1 fascia?
SF1 fascia can be fixed with either standard or adjustable Skyline brackets.
What design applications best suit the SF1 single-bend fascia?
SF1 fascia suits modern minimalist designs requiring a crisp single bend and slim projection. It’s often used on hotels and residential blocks for sharp roofline definition.
Are SF1 fascias suitable for use with concealed gutters?
For SF1 fascia use minimal profile to suit simple façades, but keep bracket centres tight (e.g., max 600mm) to avoid distortion under wind load.
What bracket type provides the best alignment for single-bend fascia?
Use continuous carriers for single-bend fascia to prevent twist and ensure crisp edge alignment.
What’s the easiest way to maintain SF1 fascia finishes?
Clean SF1 fascia surfaces each spring with mild detergent and check for any coating chips.