The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Skyline SLIMLINE Window Surrounds provide a modern framing solution with a 50mm projection and a 100mm face width, offering sharp architectural detailing for both windows and doors. Manufactured from non-combustible 2mm aluminium sheet and supplied as complete kits with brackets, lengths, and corners, they are designed to be cut down on site to suit project requirements. The system eliminates the need for costly joinery or boxing while delivering a lightweight, durable, and low-maintenance solution.

Square Window Pod Kits are available in sizes up to a maximum of 3200mm x 3200mm, with each kit designed for straightforward installation using robust 3mm thick aluminium brackets that fix directly to the façade.

Rectangular Window Pod Kits are available in the same size range, from 700mm x 1200mm up to 3200mm x 3200mm, providing design flexibility for a wide variety of window openings.

Door Pod Kits feature the same 50mm projection and 100mm face width, available in maximum sizes of 1200mm x 2100mm and 2200mm x 2100mm, creating consistency across both windows and doorways.

All SLIMLINE kits are supplied in a polyester powder-coated unicolour finish, with a choice of 26 standard RAL colours. Other colour options are available on request, subject to surcharge. The innovative cantilever bracket system fixes directly to the building façade, ensuring fast installation and a clean, uninterrupted appearance. Please note that suitable wall fixings and sealant are not included and must be sourced separately.

Skyline SLIMLINE window surrounds are suitable for both new build and refurbishment projects, providing a robust, ecological solution with long-term durability and modern design appeal.

Please note: Product images are for illustration purposes only and may not represent exact profiles or dimensions.

The Alumasc Skyline SLIMLINE Window Surrounds provide a modern framing solution with a 50mm projection and a 100mm face width, offering sharp architectural detailing for both windows and doors. Manufactured from non-combustible 2mm aluminium sheet and supplied as complete kits with brackets, lengths, and corners, they are designed to be cut down on site to suit project requirements. The system eliminates the need for costly joinery or boxing while delivering a lightweight, durable, and low-maintenance solution.

Square Window Pod Kits are available in sizes up to a maximum of 3200mm x 3200mm, with each kit designed for straightforward installation using robust 3mm thick aluminium brackets that fix directly to the façade.

Rectangular Window Pod Kits are available in the same size range, from 700mm x 1200mm up to 3200mm x 3200mm, providing design flexibility for a wide variety of window openings.

Door Pod Kits feature the same 50mm projection and 100mm face width, available in maximum sizes of 1200mm x 2100mm and 2200mm x 2100mm, creating consistency across both windows and doorways.

All SLIMLINE kits are supplied in a polyester powder-coated unicolour finish, with a choice of 26 standard RAL colours. Other colour options are available on request, subject to surcharge. The innovative cantilever bracket system fixes directly to the building façade, ensuring fast installation and a clean, uninterrupted appearance. Please note that suitable wall fixings and sealant are not included and must be sourced separately.

Skyline SLIMLINE window surrounds are suitable for both new build and refurbishment projects, providing a robust, ecological solution with long-term durability and modern design appeal.

Please note: Product images are for illustration purposes only and may not represent exact profiles or dimensions.

The Alumasc Skyline Soffit range provides high-quality aluminium soffit solutions for a clean, durable roof underside finish. Manufactured from strong, recyclable aluminium with a tough polyester powder-coated surface, these soffits are available in plank or panel designs to suit any project. Choose from a standard palette of 29 colours, with additional BS or RAL shades available to special order (subject to quantity and cost). Designed for both new builds and refurbishments, Skyline soffits integrate seamlessly with Alumasc fascia systems, delivering long-term performance and low maintenance.

Please note that “girth” refers to the total width of the aluminium fascia, including all bends. Product images are for illustration purposes only and may not represent the exact profile or dimensions supplied.

Before manufacture, we will require you to provide a sketch confirming your exact measurements. A detailed drawing will then be prepared and sent to you within 5 working days for approval. Production will only begin once these drawings have been signed off.

The standard lead time for manufacture is approximately 10 working days from drawing approval. Bespoke colours or non-standard profiles may require additional time.

The Alumasc Swaged range of extruded aluminium downpipes is a traditional circular system designed for both new build and refurbishment projects. Available in a wide choice of pipe sizes and lengths, the range also includes bends, branches, access pipes, offsets, shoes, hoppers and associated fittings, providing a complete rainwater solution.

The system uses a conventional male/female push-fit connection with an enlarged swaged end to each pipe length, ensuring secure jointing and a straightforward installation process. Pipes are mounted on brackets to stand clear of the building façade, combining practicality with a clean, functional appearance.

Manufactured from high-quality aluminium, Swaged downpipes are lightweight, durable and resistant to corrosion. The design fully accommodates thermal movement while maintaining excellent rigidity and long service life, with an expected lifespan of up to 40 years in rural and suburban locations and up to 25 years in industrial or marine environments.

All products are available in plain mill finish for on-site painting, or with BBA-approved polyester powder coatings factory-applied in 26 standard colours, with additional BS or RAL shades available on request. As with all Alumasc aluminium systems, the Swaged range is 100% recyclable, delivering both sustainability and proven performance.

The Alumasc Swaged range of extruded aluminium downpipes is a traditional circular system designed for both new build and refurbishment projects. Available in a wide choice of pipe sizes and lengths, the range also includes bends, branches, access pipes, offsets, shoes, hoppers and associated fittings, providing a complete rainwater solution.

The system uses a conventional male/female push-fit connection with an enlarged swaged end to each pipe length, ensuring secure jointing and a straightforward installation process. Pipes are mounted on brackets to stand clear of the building façade, combining practicality with a clean, functional appearance.

Manufactured from high-quality aluminium, Swaged downpipes are lightweight, durable and resistant to corrosion. The design fully accommodates thermal movement while maintaining excellent rigidity and long service life, with an expected lifespan of up to 40 years in rural and suburban locations and up to 25 years in industrial or marine environments.

All products are available in plain mill finish for on-site painting, or with BBA-approved polyester powder coatings factory-applied in 26 standard colours, with additional BS or RAL shades available on request. As with all Alumasc aluminium systems, the Swaged range is 100% recyclable, delivering both sustainability and proven performance.

The Alumasc Swaged range of extruded aluminium downpipes is a traditional circular system designed for both new build and refurbishment projects. Available in a wide choice of pipe sizes and lengths, the range also includes bends, branches, access pipes, offsets, shoes, hoppers and associated fittings, providing a complete rainwater solution.

The system uses a conventional male/female push-fit connection with an enlarged swaged end to each pipe length, ensuring secure jointing and a straightforward installation process. Pipes are mounted on brackets to stand clear of the building façade, combining practicality with a clean, functional appearance.

Manufactured from high-quality aluminium, Swaged downpipes are lightweight, durable and resistant to corrosion. The design fully accommodates thermal movement while maintaining excellent rigidity and long service life, with an expected lifespan of up to 40 years in rural and suburban locations and up to 25 years in industrial or marine environments.

All products are available in plain mill finish for on-site painting, or with BBA-approved polyester powder coatings factory-applied in 26 standard colours, with additional BS or RAL shades available on request. As with all Alumasc aluminium systems, the Swaged range is 100% recyclable, delivering both sustainability and proven performance.

The Alumasc Swaged range of extruded aluminium downpipes is a traditional circular system designed for both new build and refurbishment projects. Available in a wide choice of pipe sizes and lengths, the range also includes bends, branches, access pipes, offsets, shoes, hoppers and associated fittings, providing a complete rainwater solution.

The system uses a conventional male/female push-fit connection with an enlarged swaged end to each pipe length, ensuring secure jointing and a straightforward installation process. Pipes are mounted on brackets to stand clear of the building façade, combining practicality with a clean, functional appearance.

Manufactured from high-quality aluminium, Swaged downpipes are lightweight, durable and resistant to corrosion. The design fully accommodates thermal movement while maintaining excellent rigidity and long service life, with an expected lifespan of up to 40 years in rural and suburban locations and up to 25 years in industrial or marine environments.

All products are available in plain mill finish for on-site painting, or with BBA-approved polyester powder coatings factory-applied in 26 standard colours, with additional BS or RAL shades available on request. As with all Alumasc aluminium systems, the Swaged range is 100% recyclable, delivering both sustainability and proven performance.

The Alumasc Swaged range of extruded aluminium downpipes is a traditional circular system designed for both new build and refurbishment projects. Available in a wide choice of pipe sizes and lengths, the range also includes bends, branches, access pipes, offsets, shoes, hoppers and associated fittings, providing a complete rainwater solution.

The system uses a conventional male/female push-fit connection with an enlarged swaged end to each pipe length, ensuring secure jointing and a straightforward installation process. Pipes are mounted on brackets to stand clear of the building façade, combining practicality with a clean, functional appearance.

Manufactured from high-quality aluminium, Swaged downpipes are lightweight, durable and resistant to corrosion. The design fully accommodates thermal movement while maintaining excellent rigidity and long service life, with an expected lifespan of up to 40 years in rural and suburban locations and up to 25 years in industrial or marine environments.

All products are available in plain mill finish for on-site painting, or with BBA-approved polyester powder coatings factory-applied in 26 standard colours, with additional BS or RAL shades available on request. As with all Alumasc aluminium systems, the Swaged range is 100% recyclable, delivering both sustainability and proven performance.

The Alumasc Swaged range of extruded aluminium downpipes is a traditional circular system designed for both new build and refurbishment projects. Available in a wide choice of pipe sizes and lengths, the range also includes bends, branches, access pipes, offsets, shoes, hoppers and associated fittings, providing a complete rainwater solution.

The system uses a conventional male/female push-fit connection with an enlarged swaged end to each pipe length, ensuring secure jointing and a straightforward installation process. Pipes are mounted on brackets to stand clear of the building façade, combining practicality with a clean, functional appearance.

Manufactured from high-quality aluminium, Swaged downpipes are lightweight, durable and resistant to corrosion. The design fully accommodates thermal movement while maintaining excellent rigidity and long service life, with an expected lifespan of up to 40 years in rural and suburban locations and up to 25 years in industrial or marine environments.

All products are available in plain mill finish for on-site painting, or with BBA-approved polyester powder coatings factory-applied in 26 standard colours, with additional BS or RAL shades available on request. As with all Alumasc aluminium systems, the Swaged range is 100% recyclable, delivering both sustainability and proven performance.

The Alumasc Swaged range of extruded aluminium downpipes is a traditional circular system designed for both new build and refurbishment projects. Available in a wide choice of pipe sizes and lengths, the range also includes bends, branches, access pipes, offsets, shoes, hoppers and associated fittings, providing a complete rainwater solution.

The system uses a conventional male/female push-fit connection with an enlarged swaged end to each pipe length, ensuring secure jointing and a straightforward installation process. Pipes are mounted on brackets to stand clear of the building façade, combining practicality with a clean, functional appearance.

Manufactured from high-quality aluminium, Swaged downpipes are lightweight, durable and resistant to corrosion. The design fully accommodates thermal movement while maintaining excellent rigidity and long service life, with an expected lifespan of up to 40 years in rural and suburban locations and up to 25 years in industrial or marine environments.

All products are available in plain mill finish for on-site painting, or with BBA-approved polyester powder coatings factory-applied in 26 standard colours, with additional BS or RAL shades available on request. As with all Alumasc aluminium systems, the Swaged range is 100% recyclable, delivering both sustainability and proven performance.

The Alumasc Swaged range of extruded aluminium downpipes is a traditional circular system designed for both new build and refurbishment projects. Available in a wide choice of pipe sizes and lengths, the range also includes bends, branches, access pipes, offsets, shoes, hoppers and associated fittings, providing a complete rainwater solution.

The system uses a conventional male/female push-fit connection with an enlarged swaged end to each pipe length, ensuring secure jointing and a straightforward installation process. Pipes are mounted on brackets to stand clear of the building façade, combining practicality with a clean, functional appearance.

Manufactured from high-quality aluminium, Swaged downpipes are lightweight, durable and resistant to corrosion. The design fully accommodates thermal movement while maintaining excellent rigidity and long service life, with an expected lifespan of up to 40 years in rural and suburban locations and up to 25 years in industrial or marine environments.

All products are available in plain mill finish for on-site painting, or with BBA-approved polyester powder coatings factory-applied in 26 standard colours, with additional BS or RAL shades available on request. As with all Alumasc aluminium systems, the Swaged range is 100% recyclable, delivering both sustainability and proven performance.

The Alumasc Swaged range of extruded aluminium downpipes is a traditional circular system designed for both new build and refurbishment projects. Available in a wide choice of pipe sizes and lengths, the range also includes bends, branches, access pipes, offsets, shoes, hoppers and associated fittings, providing a complete rainwater solution.

The system uses a conventional male/female push-fit connection with an enlarged swaged end to each pipe length, ensuring secure jointing and a straightforward installation process. Pipes are mounted on brackets to stand clear of the building façade, combining practicality with a clean, functional appearance.

Manufactured from high-quality aluminium, Swaged downpipes are lightweight, durable and resistant to corrosion. The design fully accommodates thermal movement while maintaining excellent rigidity and long service life, with an expected lifespan of up to 40 years in rural and suburban locations and up to 25 years in industrial or marine environments.

All products are available in plain mill finish for on-site painting, or with BBA-approved polyester powder coatings factory-applied in 26 standard colours, with additional BS or RAL shades available on request. As with all Alumasc aluminium systems, the Swaged range is 100% recyclable, delivering both sustainability and proven performance.

The Alumasc Swaged range of extruded aluminium downpipes is a traditional circular system designed for both new build and refurbishment projects. Available in a wide choice of pipe sizes and lengths, the range also includes bends, branches, access pipes, offsets, shoes, hoppers and associated fittings, providing a complete rainwater solution.

The system uses a conventional male/female push-fit connection with an enlarged swaged end to each pipe length, ensuring secure jointing and a straightforward installation process. Pipes are mounted on brackets to stand clear of the building façade, combining practicality with a clean, functional appearance.

Manufactured from high-quality aluminium, Swaged downpipes are lightweight, durable and resistant to corrosion. The design fully accommodates thermal movement while maintaining excellent rigidity and long service life, with an expected lifespan of up to 40 years in rural and suburban locations and up to 25 years in industrial or marine environments.

All products are available in plain mill finish for on-site painting, or with BBA-approved polyester powder coatings factory-applied in 26 standard colours, with additional BS or RAL shades available on request. As with all Alumasc aluminium systems, the Swaged range is 100% recyclable, delivering both sustainability and proven performance.

The Alumasc Swaged range of extruded aluminium downpipes is a traditional circular system designed for both new build and refurbishment projects. Available in a wide choice of pipe sizes and lengths, the range also includes bends, branches, access pipes, offsets, shoes, hoppers and associated fittings, providing a complete rainwater solution.

The system uses a conventional male/female push-fit connection with an enlarged swaged end to each pipe length, ensuring secure jointing and a straightforward installation process. Pipes are mounted on brackets to stand clear of the building façade, combining practicality with a clean, functional appearance.

Manufactured from high-quality aluminium, Swaged downpipes are lightweight, durable and resistant to corrosion. The design fully accommodates thermal movement while maintaining excellent rigidity and long service life, with an expected lifespan of up to 40 years in rural and suburban locations and up to 25 years in industrial or marine environments.

All products are available in plain mill finish for on-site painting, or with BBA-approved polyester powder coatings factory-applied in 26 standard colours, with additional BS or RAL shades available on request. As with all Alumasc aluminium systems, the Swaged range is 100% recyclable, delivering both sustainability and proven performance.

The Alumasc Touch Up Paint (125ml) is designed for small repairs and detailing work across Alumasc guttering and rainwater systems. Available in 26 standard PPC colours, it provides a precise colour match for maintaining a seamless finish.

This touch up paint is ideal for covering minor surface marks, scratches, or for colouring exposed nuts and bolts so they blend with the installed guttering. It is not recommended for use on entire gutter lengths or large surface areas.

Compact and easy to apply, Alumasc Touch Up Paint ensures installations maintain their professional appearance over time.

The 310ML Dow Corning 791 Sealant is part of the ARP range, supplied to complete and maintain your rainwater installation.