The Timber Line Canopy with Integral Drainage is part of the ARP Canopy range of aluminium canopy, available in sizes from 1600x900mm to 2500x900mm. The canopy provides a stylish, low-maintenance shelter over a doorway or entrance, combining weather protection with a contemporary aluminium finish.

ARP has manufactured aluminium roofline and rainwater products in Leicestershire for over 30 years. Aluminium is lightweight, corrosion-resistant and low-maintenance, with a functional life expectancy of over 40 years, and it is 100% recyclable at the end of its life, making it a genuinely sustainable alternative to plastic.

Available sizes: 1600x900mm, 2000x900mm, 2500x900mm.

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (2.5-4") Cast Iron Round (92.5-135°) Bends is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 2.5" to 4". The round downpipe offers a classic circular profile that complements both traditional and modern rainwater schemes.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 2.5", 3", 4".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (2.5-4") Cast Iron Round (92.5-135°) Branches is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 2.5" to 4". The round downpipe offers a classic circular profile that complements both traditional and modern rainwater schemes.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 2.5", 3", 4".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (2.5-4") Cast Iron Round Eared Downpipe (2-6ft) Lengths is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 2.5" to 4". The round downpipe offers a classic circular profile that complements both traditional and modern rainwater schemes.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 2.5", 3", 4".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (2.5-4") Cast Iron Round Inspection Pipes is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 2.5" to 4". The round downpipe offers a classic circular profile that complements both traditional and modern rainwater schemes.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 2.5", 3", 4".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (2.5-4") Cast Iron Round Loose Sockets is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 2.5" to 4". The round downpipe offers a classic circular profile that complements both traditional and modern rainwater schemes.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 2.5", 3", 4".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (2.5-4") Cast Iron Round Offsets is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 2.5" to 4". The round downpipe offers a classic circular profile that complements both traditional and modern rainwater schemes.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 2.5", 3", 4".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (2.5-4") Cast Iron Round Pipe Brackets is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 2.5" to 4". The round downpipe offers a classic circular profile that complements both traditional and modern rainwater schemes.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 2.5", 3", 4".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (2.5-4") Cast Iron Round Rainwater Diverter Kits is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 2.5" to 4". The round downpipe offers a classic circular profile that complements both traditional and modern rainwater schemes.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 2.5", 3", 4".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (2.5-4") Cast Iron Round Shoes is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 2.5" to 4". The round downpipe offers a classic circular profile that complements both traditional and modern rainwater schemes.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 2.5", 3", 4".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (2.5-4") Cast Iron Round Uneared Downpipe (2-6ft) Lengths is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 2.5" to 4". The round downpipe offers a classic circular profile that complements both traditional and modern rainwater schemes.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 2.5", 3", 4".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4-6") Cast Iron Plain Half Round Gutter (6ft) Lengths is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4" to 6". The half round profile is the classic, clean curved trough that complements both traditional and contemporary buildings.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4", 4.5", 5", 6".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4-6") Cast Iron Plain Half Round Gutter (90-135°) Angles is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4" to 6". The half round profile is the classic, clean curved trough that complements both traditional and contemporary buildings.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4", 4.5", 5", 6".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4-6") Cast Iron Plain Half Round Gutter Brackets is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4" to 6". The half round profile is the classic, clean curved trough that complements both traditional and contemporary buildings.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4", 4.5", 5", 6".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4-6") Cast Iron Plain Half Round Gutter Dropend Outlets is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4" to 6". The half round profile is the classic, clean curved trough that complements both traditional and contemporary buildings.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4", 4.5", 5", 6".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4-6") Cast Iron Plain Half Round Gutter Running Outlets is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4" to 6". The half round profile is the classic, clean curved trough that complements both traditional and contemporary buildings.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4", 4.5", 5", 6".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4-6") Cast Iron Plain Half Round Gutter Stopends is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4" to 6". The half round profile is the classic, clean curved trough that complements both traditional and contemporary buildings.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4", 4.5", 5", 6".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4-6") Cast Iron Plain Half Round Gutter Union Connectors is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4" to 6". The half round profile is the classic, clean curved trough that complements both traditional and contemporary buildings.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4", 4.5", 5", 6".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4.5-5") Cast Iron Beaded Half Round Gutter (6ft) Lengths is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4.5" to 5". The beaded half round profile takes the classic curved trough and adds a stiffening bead along the front edge — a traditional detail that suits period and heritage properties as well as new build.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4.5", 5".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4.5-5") Cast Iron Beaded Half Round Gutter (90-135°) Angles is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4.5" to 5". The beaded half round profile takes the classic curved trough and adds a stiffening bead along the front edge — a traditional detail that suits period and heritage properties as well as new build.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4.5", 5".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4.5-5") Cast Iron Beaded Half Round Gutter Brackets is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4.5" to 5". The beaded half round profile takes the classic curved trough and adds a stiffening bead along the front edge — a traditional detail that suits period and heritage properties as well as new build.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4.5", 5".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4.5-5") Cast Iron Beaded Half Round Gutter Dropend Outlets is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4.5" to 5". The beaded half round profile takes the classic curved trough and adds a stiffening bead along the front edge — a traditional detail that suits period and heritage properties as well as new build.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4.5", 5".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4.5-5") Cast Iron Beaded Half Round Gutter Running Outlets is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4.5" to 5". The beaded half round profile takes the classic curved trough and adds a stiffening bead along the front edge — a traditional detail that suits period and heritage properties as well as new build.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4.5", 5".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4.5-5") Cast Iron Beaded Half Round Gutter Stopends is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4.5" to 5". The beaded half round profile takes the classic curved trough and adds a stiffening bead along the front edge — a traditional detail that suits period and heritage properties as well as new build.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4.5", 5".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4.5-5") Cast Iron Beaded Half Round Gutter Union Connectors is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4.5" to 5". The beaded half round profile takes the classic curved trough and adds a stiffening bead along the front edge — a traditional detail that suits period and heritage properties as well as new build.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4.5", 5".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4.5-5") Cast Iron Victorian Ogee Gutter (6ft) Lengths is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4.5" to 5". The Victorian ogee profile has a decorative moulded front face that echoes traditional cast iron, giving a period look with a flat back that fixes neatly to the fascia.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4.5", 5".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4.5-5") Cast Iron Victorian Ogee Gutter (90-135°) Angles is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4.5" to 5". The Victorian ogee profile has a decorative moulded front face that echoes traditional cast iron, giving a period look with a flat back that fixes neatly to the fascia.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4.5", 5".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.

The Britannia (4.5-5") Cast Iron Victorian Ogee Gutter Brackets is part of the ARP Britannia range of traditional cast iron rainwater, available in sizes from 4.5" to 5". The Victorian ogee profile has a decorative moulded front face that echoes traditional cast iron, giving a period look with a flat back that fixes neatly to the fascia.

ARP Britannia gutters and downpipes are traditionally die-cast in profiles that stay true to the original cast iron styles, making them ideally suited to heritage, conservation and listed buildings. Cast iron is strong and highly resistant to damage, needs only occasional repainting, and has a functional life expectancy of over 100 years while remaining fully recyclable with a high recycled content.

This product is available primed or painted. The primed finish is supplied in grey primer ready for top-coating on site; the painted finish is factory-applied in one of eight standard semi-gloss colours.

Available sizes: 4.5", 5".

Where products are cut or drilled on site, treat any exposed edges to maintain the finish and prevent corrosion. Standard finishes are typically held in stock; non-standard RAL or BS colours and special finishes are made to order, with lead times confirmed at the time of order. Product images are for illustration only and may not show the exact size or fitting supplied.