Home / The Trade Desk / From a roof sketch to a guttering order

alumasc

From a roof sketch to a guttering order

Send us a roof plan or a quick sketch and we’ll take it from there. On this job, we sent out gutter and downpipe samples so the customer could see how they looked together. Once they had the bits in front of them, they changed what they ordered.

The AGD technical desk Published 19 November 2026 · Updated 19 November 2026 · 2 min read
Email
From a roof sketch to a guttering order
From a roof sketch to a guttering order

By Josh Stafford, Aluminium Gutters Direct

When you’re on a roof, you’ve usually got enough going on without spending half your evening working out which outlet goes with which gutter. And if it’s your own house, you might know roughly what look you’re after but have no idea what the profile’s called. Either way, send us what you’ve got. We can take it from there.

A sketch is enough to get started

This is the sort of drawing we can work from. You can see the lengths, where the gutter turns a corner and where the downpipes are likely to go. If yours is a photo of a sketch in a notebook, that’s fine. Put on the measurements you’ve got and we’ll come back to you if there’s anything else we need.

The bit I always look for is where the gutter has to turn to get to the downpipe. There’s a note about exactly that on this sketch, up by the garage. It’s the sort of thing that’s obvious when you’re stood looking at the building but easy to miss on a list of lengths.

The samples changed the order

On this job, we sent samples so the customer could see how the gutter and downpipe looked together. Once they had the pieces in front of them, they changed what they wanted to order. It’s a lot easier to make that call when you’re holding the two bits next to each other.

Look at the curve on that ogee and the collar on the pipe. Together they give you quite a traditional look. Go for a straighter gutter and a pipe with a less visible joint and the same building can look much more modern. You see a little piece of gutter in a product photo. On the house, that line goes all the way along the roof, and the pipe runs down the wall. It makes more difference than people expect.

Send us what you’ve got

If you’re pricing a job or sorting out your own house, send us the drawings, a quick sketch or a few photos with whatever measurements you have. Tell us if you’re trying to match what’s already there or if you fancy something different. We’ll help work out what you need and, if you’re between two options, we can send samples so you can make your mind up before you order. 

About me: 

I’m Josh Stafford from Aluminium Gutters Direct. My background’s in the roofing trade, so I know what it’s like trying to price a job and make sure everything you need turns up on site. These days we help roofers, builders and homeowners work out what gutters, downpipes and fittings they need, even if all they’ve got to start with is a photo or a quick sketch.

Got two quotes and cannot tell the difference?

Send us both. We will tell you what the specification gap actually is, and match the lower price if it is genuinely like for like.