The AGD Signature Range deep flow Fast-Fit jointing clip connects adjoining sections of the matching gutter system. It forms part of the joint assembly between lengths and compatible fittings.

The clip follows the deep flow Fast-Fit section to provide the appropriate joint interface. Use it with the specified sealant and joint preparation method for this system.

Gutter size: 125x100mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Match the clip to the gutter size and jointing arrangement. Follow the profile-specific instructions for assembly and expansion allowance; a clip alone does not replace the required sealing work.

The AGD Signature Range deep flow Fast-Fit rafter bracket provides a support option where the gutter needs to be mounted from the rafters. It is useful where a fascia fixing arrangement is unsuitable.

Select Top Fix for fixing from above or Side Fix for attachment to the side of the rafter. Choose the version that suits the accessible fixing face and the required gutter position.

Gutter size: 125x100mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Match the bracket to the deep flow Fast-Fit gutter size. Check the rafter arrangement, roof edge clearance and required fixing positions before ordering.

The AGD Signature Range deep flow Fast-Fit fascia bracket supports the matching gutter from the fascia board. Its profile follows the gutter section to keep the run securely positioned beneath the roof edge.

Choose the bracket size to match the deep flow Fast-Fit gutter. Suitable support positions help maintain the intended alignment and fall along the installation.

Gutter size: 125x100mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Use fixings appropriate for the fascia and follow the profile-specific installation guidance for bracket spacing and support around fittings.

The AGD Signature Range deep flow Fast-Fit stop end closes an open end of the gutter run. It provides the matching terminal fitting where the gutter finishes at the edge of the roofline.

Made for the deep flow Fast-Fit profile, this aluminium component completes the shape of the gutter at the end of the run. Select the size that matches the gutter section.

Gutter size: 125x100mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Fit and seal the stop end in accordance with the system instructions. Check the completed joint as part of the installation's water test.

The AGD Signature Range deep flow Fast-Fit running outlet creates the connection between the gutter run and the downpipe. It collects water from the adjoining gutter sections and directs it into the selected outlet.

Choose the gutter size first, then select an available round, square or rectangular outlet to suit your downpipe. Outlet choices depend on the gutter size and are shown in the product options.

Gutter size: 125x100mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Check both the gutter connection and downpipe outlet dimensions before ordering. The number and position of outlets should be chosen to suit the roof area and drainage layout.

The AGD Signature Range deep flow Fast-Fit gutter angle takes the gutter run around a building corner while maintaining the matching profile. It connects straight sections where the roofline changes direction.

These aluminium corner fittings are available in internal and external 90° and 135° options. Choose the angle and orientation required by the layout rather than cutting a standard straight length to form the corner.

Gutter size: 125x100mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Use with the same size of deep flow Fast-Fit gutter and the matching jointing components. Check the corner orientation against your plan before ordering.

The AGD Signature Range deep flow Fast-Fit aluminium gutter collects rainwater along the roof edge and carries it towards the outlets. Matching corners, outlets and end fittings allow the run to follow the shape of the building.

The deep rounded profile provides a deeper rainwater channel in an extruded aluminium section. Select the complete drainage system to suit the roof area and outlet arrangement.

Gutter size: 125x100mm. Length options: 0.5m, 1m, 2m, 2.5m and 3m. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

This profile requires matching support brackets and is not intended for direct fixing through the gutter. Use the correct jointing components and sealant, and allow for thermal movement in accordance with the system instructions.