The AGD Signature Range moulded ogee Fast-Fit jointing clip connects adjoining sections of the matching gutter system. It forms part of the joint assembly between lengths and compatible fittings.

The clip follows the moulded ogee Fast-Fit section to provide the appropriate joint interface. Use it with the specified sealant and joint preparation method for this system.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Match the clip to the gutter size and jointing arrangement. Follow the profile-specific instructions for assembly and expansion allowance; a clip alone does not replace the required sealing work.

The AGD Signature Range moulded ogee Fast-Fit rise and fall bracket allows the gutter height to be adjusted during installation. It helps establish the required alignment and fall where the support positions need individual adjustment.

Designed for the matching moulded ogee Fast-Fit section, this bracket provides an alternative support arrangement for layouts that need more control over the gutter level.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Choose the correct gutter size and confirm that the fixing arrangement is suitable for the building. Follow the installation guidance for spacing and adjustment.

The AGD Signature Range moulded ogee Fast-Fit rafter bracket provides a support option where the gutter needs to be mounted from the rafters. It is useful where a fascia fixing arrangement is unsuitable.

Select Top Fix for fixing from above or Side Fix for attachment to the side of the rafter. Choose the version that suits the accessible fixing face and the required gutter position.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Match the bracket to the moulded ogee Fast-Fit gutter size. Check the rafter arrangement, roof edge clearance and required fixing positions before ordering.

The AGD Signature Range moulded ogee Fast-Fit fascia bracket supports the matching gutter from the fascia board. Its profile follows the gutter section to keep the run securely positioned beneath the roof edge.

Choose the bracket size to match the moulded ogee Fast-Fit gutter. Suitable support positions help maintain the intended alignment and fall along the installation.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Use fixings appropriate for the fascia and follow the profile-specific installation guidance for bracket spacing and support around fittings.

The AGD Signature Range moulded ogee Fast-Fit stop end closes an open end of the gutter run. It provides the matching terminal fitting where the gutter finishes at the edge of the roofline.

Made for the moulded ogee Fast-Fit profile, this aluminium component completes the shape of the gutter at the end of the run. Left-hand and right-hand options are available; choose the hand required by your layout.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Fit and seal the stop end in accordance with the system instructions. Check the completed joint as part of the installation's water test.

The AGD Signature Range moulded ogee Fast-Fit running outlet creates the connection between the gutter run and the downpipe. It collects water from the adjoining gutter sections and directs it into the selected outlet.

Choose the gutter size first, then select an available round, square or rectangular outlet to suit your downpipe. Outlet choices depend on the gutter size and are shown in the product options.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Check both the gutter connection and downpipe outlet dimensions before ordering. The number and position of outlets should be chosen to suit the roof area and drainage layout.

The AGD Signature Range moulded ogee Fast-Fit gutter angle takes the gutter run around a building corner while maintaining the matching profile. It connects straight sections where the roofline changes direction.

These aluminium corner fittings are available in internal and external 90° and 135° options. Choose the angle and orientation required by the layout rather than cutting a standard straight length to form the corner.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Use with the same size of moulded ogee Fast-Fit gutter and the matching jointing components. Check the corner orientation against your plan before ordering.

The AGD Signature Range moulded ogee Fast-Fit aluminium gutter collects rainwater along the roof edge and carries it towards the outlets. Matching corners, outlets and end fittings allow the run to follow the shape of the building.

The shaped ogee front gives the roofline a more decorative appearance. The gutter lengths are made from extruded aluminium and suit both refurbishment and new-build projects.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm and 200x150mm. Length options: 0.5m, 1m, 2m, 2.5m and 3m. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

The moulded ogee system can be supported on matching fascia brackets or directly fixed through the back, following the installation guidance. Use the correct jointing components and sealant, and allow for thermal movement in accordance with the system instructions.