The AGD Signature Range deep flow Fast-Fit running outlet creates the connection between the gutter run and the downpipe. It collects water from the adjoining gutter sections and directs it into the selected outlet.

Choose the gutter size first, then select an available round, square or rectangular outlet to suit your downpipe. Outlet choices depend on the gutter size and are shown in the product options.

Gutter size: 125x100mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Check both the gutter connection and downpipe outlet dimensions before ordering. The number and position of outlets should be chosen to suit the roof area and drainage layout.

The AGD Signature Range deep flow Fast-Fit gutter angle takes the gutter run around a building corner while maintaining the matching profile. It connects straight sections where the roofline changes direction.

These aluminium corner fittings are available in internal and external 90° and 135° options. Choose the angle and orientation required by the layout rather than cutting a standard straight length to form the corner.

Gutter size: 125x100mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Use with the same size of deep flow Fast-Fit gutter and the matching jointing components. Check the corner orientation against your plan before ordering.

The AGD Signature Range deep flow Fast-Fit aluminium gutter collects rainwater along the roof edge and carries it towards the outlets. Matching corners, outlets and end fittings allow the run to follow the shape of the building.

The deep rounded profile provides a deeper rainwater channel in an extruded aluminium section. Select the complete drainage system to suit the roof area and outlet arrangement.

Gutter size: 125x100mm. Length options: 0.5m, 1m, 2m, 2.5m and 3m. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

This profile requires matching support brackets and is not intended for direct fixing through the gutter. Use the correct jointing components and sealant, and allow for thermal movement in accordance with the system instructions.

The AGD Signature Range beaded half round Fast-Fit jointing clip connects adjoining sections of the matching gutter system. It forms part of the joint assembly between lengths and compatible fittings.

The clip follows the beaded half round Fast-Fit section to provide the appropriate joint interface. Use it with the specified sealant and joint preparation method for this system.

Gutter sizes: 112mm, 125mm and 150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Match the clip to the gutter size and jointing arrangement. Follow the profile-specific instructions for assembly and expansion allowance; a clip alone does not replace the required sealing work.

The AGD Signature Range beaded half round Fast-Fit rise and fall bracket allows the gutter height to be adjusted during installation. It helps establish the required alignment and fall where the support positions need individual adjustment.

Designed for the matching beaded half round Fast-Fit section, this bracket provides an alternative support arrangement for layouts that need more control over the gutter level.

Gutter sizes: 112mm, 125mm and 150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Choose the correct gutter size and confirm that the fixing arrangement is suitable for the building. Follow the installation guidance for spacing and adjustment.

The AGD Signature Range beaded half round Fast-Fit rafter bracket provides a support option where the gutter needs to be mounted from the rafters. It is useful where a fascia fixing arrangement is unsuitable.

Select Top Fix for fixing from above or Side Fix for attachment to the side of the rafter. Choose the version that suits the accessible fixing face and the required gutter position.

Gutter sizes: 112mm, 125mm and 150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Match the bracket to the beaded half round Fast-Fit gutter size. Check the rafter arrangement, roof edge clearance and required fixing positions before ordering.

The AGD Signature Range beaded half round Fast-Fit fascia bracket supports the matching gutter from the fascia board. Its profile follows the gutter section to keep the run securely positioned beneath the roof edge.

Choose the bracket size to match the beaded half round Fast-Fit gutter. Suitable support positions help maintain the intended alignment and fall along the installation.

Gutter sizes: 112mm, 125mm and 150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Use fixings appropriate for the fascia and follow the profile-specific installation guidance for bracket spacing and support around fittings.

The AGD Signature Range beaded half round Fast-Fit stop end closes an open end of the gutter run. It provides the matching terminal fitting where the gutter finishes at the edge of the roofline.

Made for the beaded half round Fast-Fit profile, this aluminium component completes the shape of the gutter at the end of the run. Select the size that matches the gutter section.

Gutter sizes: 112mm, 125mm and 150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Fit and seal the stop end in accordance with the system instructions. Check the completed joint as part of the installation's water test.

The AGD Signature Range beaded half round Fast-Fit running outlet creates the connection between the gutter run and the downpipe. It collects water from the adjoining gutter sections and directs it into the selected outlet.

Choose the gutter size first, then select an available round, square or rectangular outlet to suit your downpipe. Outlet choices depend on the gutter size and are shown in the product options.

Gutter sizes: 112mm, 125mm and 150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Check both the gutter connection and downpipe outlet dimensions before ordering. The number and position of outlets should be chosen to suit the roof area and drainage layout.

The AGD Signature Range beaded half round Fast-Fit gutter angle takes the gutter run around a building corner while maintaining the matching profile. It connects straight sections where the roofline changes direction.

These aluminium corner fittings are available in internal and external 90° and 135° options. Choose the angle and orientation required by the layout rather than cutting a standard straight length to form the corner.

Gutter sizes: 112mm, 125mm and 150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Use with the same size of beaded half round Fast-Fit gutter and the matching jointing components. Check the corner orientation against your plan before ordering.

The AGD Signature Range beaded half round Fast-Fit aluminium gutter collects rainwater along the roof edge and carries it towards the outlets. Matching corners, outlets and end fittings allow the run to follow the shape of the building.

The beaded half round profile combines the appearance of traditional guttering with extruded aluminium construction. Its curved section and defined rim suit replacement rooflines and new installations alike.

Gutter sizes: 112mm, 125mm and 150mm. Length options: 0.5m, 1m, 2m, 2.5m and 3m. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

This profile requires matching support brackets and is not intended for direct fixing through the gutter. Use the correct jointing components and sealant, and allow for thermal movement in accordance with the system instructions.

The AGD Signature Range box jointing clip connects adjoining sections of the matching gutter system. It forms part of the joint assembly between lengths and compatible fittings.

The clip follows the box section to provide the appropriate joint interface. Use it with the specified sealant and joint preparation method for this system.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm, 150x150mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Match the clip to the gutter size and jointing arrangement. Follow the profile-specific instructions for assembly and expansion allowance; a clip alone does not replace the required sealing work.

The AGD Signature Range box rise and fall bracket allows the gutter height to be adjusted during installation. It helps establish the required alignment and fall where the support positions need individual adjustment.

Designed for the matching box section, this bracket provides an alternative support arrangement for layouts that need more control over the gutter level.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm, 150x150mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Choose the correct gutter size and confirm that the fixing arrangement is suitable for the building. Follow the installation guidance for spacing and adjustment.

The AGD Signature Range box rafter bracket provides a support option where the gutter needs to be mounted from the rafters. It is useful where a fascia fixing arrangement is unsuitable.

Select Top Fix for fixing from above or Side Fix for attachment to the side of the rafter. Choose the version that suits the accessible fixing face and the required gutter position.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm, 150x150mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Match the bracket to the box gutter size. Check the rafter arrangement, roof edge clearance and required fixing positions before ordering.

The AGD Signature Range box fascia bracket supports the matching gutter from the fascia board. Its profile follows the gutter section to keep the run securely positioned beneath the roof edge.

Choose the bracket size to match the box gutter. Suitable support positions help maintain the intended alignment and fall along the installation.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm, 150x150mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Use fixings appropriate for the fascia and follow the profile-specific installation guidance for bracket spacing and support around fittings.

The AGD Signature Range box stop end closes an open end of the gutter run. It provides the matching terminal fitting where the gutter finishes at the edge of the roofline.

Made for the box profile, this aluminium component completes the shape of the gutter at the end of the run. Left-hand and right-hand options are available; choose the hand required by your layout.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm, 150x150mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Fit and seal the stop end in accordance with the system instructions. Check the completed joint as part of the installation's water test.

The AGD Signature Range box running outlet creates the connection between the gutter run and the downpipe. It collects water from the adjoining gutter sections and directs it into the selected outlet.

Choose the gutter size first, then select an available round, square or rectangular outlet to suit your downpipe. Outlet choices depend on the gutter size and are shown in the product options.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm, 150x150mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Check both the gutter connection and downpipe outlet dimensions before ordering. The number and position of outlets should be chosen to suit the roof area and drainage layout.

The AGD Signature Range box gutter angle takes the gutter run around a building corner while maintaining the matching profile. It connects straight sections where the roofline changes direction.

These aluminium corner fittings are available in internal and external 90° and 135° options. Choose the angle and orientation required by the layout rather than cutting a standard straight length to form the corner.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm, 150x150mm and 200x150mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Use with the same size of box gutter and the matching jointing components. Check the corner orientation against your plan before ordering.

The AGD Signature Range box aluminium gutter collects rainwater along the roof edge and carries it towards the outlets. Matching corners, outlets and end fittings allow the run to follow the shape of the building.

The angular box profile suits domestic, commercial and industrial rooflines. It is formed from pressed aluminium sheet with a minimum 2mm gauge.

Gutter sizes: 100x76mm, 125x100mm, 150x100mm, 150x150mm and 200x150mm. Length options: 0.5m, 1m, 2m, 2.5m and 3m. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your roofline.

Use matching box gutter fittings, supports, jointing components and sealant, and allow for thermal movement in accordance with the system instructions.

The AGD Signature Range rectangular rodding access pipe provides an inspection and cleaning point within the downpipe run. It allows access for clearing a blockage without dismantling the entire installation.

The aluminium pipe section maintains the matching profile and finish while adding a practical maintenance point to the drainage layout. This version includes a socket connection for the matching socketed pipe system.

Pipe sizes: 102x76mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your guttering, windows and roofline.

Position the access opening where it can be reached after installation. Match the nominal pipe size and connection system, and keep the opening unobstructed by other building features.

The AGD Signature Range rectangular downpipe bracket supports the pipe against the building and helps maintain its alignment. Choosing the correct bracket also establishes the clearance between the pipe and the wall.

Use the bracket option that suits your fixing position and the space required behind the pipe. Each size is intended to support the corresponding downpipe profile. This listing is for the socketed rectangular downpipe range. Available styles include flush fit and 2 part variable (0-120mm).

Pipe sizes: 102x76mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your guttering, windows and roofline.

Select fixings suitable for the wall material and follow the system installation guidance for bracket positions. Bracket styles available can vary with pipe size; check your selected combination.

The AGD Signature Range rectangular adjustable offset bridges a larger difference between the position of the outlet or upper pipe and the downpipe below. The two-part arrangement helps accommodate the building's projection.

Select from the listed projection bands of 150–400mm, 401–750mm and 751–1000mm. The aluminium construction coordinates with the rest of the matching rainwater system. This version includes a socket connection for the matching socketed pipe system.

Pipe sizes: 102x76mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your guttering, windows and roofline.

Measure the required offset and choose the appropriate projection band. Confirm the final projection and fitting arrangement with AGD before ordering, and provide suitable support for the completed run.

The AGD Signature Range rectangular double branch junction connects two side branches to a main rainwater pipe. It provides a single junction where several parts of the drainage layout converge.

Available in aluminium with 92.5°, 112.5° and 135° options, the fitting keeps the branch connections within the matching downpipe system. This version includes a socket connection for the matching socketed pipe system.

Pipe sizes: 102x76mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your guttering, windows and roofline.

Check the branch orientation and pipe sizes against the proposed layout. Size the receiving downpipe for the combined flow rather than choosing it solely to match the individual branches.

The AGD Signature Range rectangular one-part offset moves the downpipe run between two positions, helping connect an outlet or upper pipe to the pipework below. It is intended for the listed 63–149mm projection range.

The one-piece aluminium fitting provides a compact change in alignment around eaves and building details while retaining the matching pipe profile. This version includes a socket connection for the matching socketed pipe system.

Pipe sizes: 102x76mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your guttering, windows and roofline.

Measure the required projection before ordering and confirm the specific dimension with AGD. Match the pipe size and connection system to the adjoining components.

The AGD Signature Range rectangular single branch junction brings a side rainwater pipe into a main downpipe. It is useful where two drainage routes need to meet before continuing down the building.

This aluminium junction is available with 92.5°, 112.5° and 135° branch angles. Choose the angle that suits the direction of the incoming pipe and the space available. This version includes a socket connection for the matching socketed pipe system.

Pipe sizes: 102x76mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your guttering, windows and roofline.

Use matching pipe sizes and connection types throughout the junction. The receiving downpipe must be sized for the combined flow from the connected roof areas.

The AGD Signature Range rectangular downpipe shoe finishes the base of a rectangular rainwater pipe and directs the discharge towards the intended drainage point. It provides a defined outlet at the bottom of the run.

The aluminium construction coordinates with the matching downpipe system, helping create a consistent appearance from roofline to ground level. This version includes a socket connection for the matching socketed pipe system.

Pipe sizes: 102x76mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your guttering, windows and roofline.

Position the shoe to discharge into a suitable drainage arrangement and check the required clearance at ground level. Select the same nominal size and connection system as the downpipe.

The AGD Signature Range rectangular downpipe bend changes the direction of the pipe run where the building layout requires it. It connects matching rectangular pipe sections while keeping the shape and finish consistent through the turn.

Available in 92.5°, 112.5° and 135° options, this aluminium fitting allows you to select the angle required by your drainage layout. This version includes a socket connection for the matching socketed pipe system.

Pipe sizes: 102x76mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your guttering, windows and roofline.

Match the bend to the adjoining pipe size and connection system. Check the route and available clearance before ordering, particularly around eaves, wall projections and other fittings.

The AGD Signature Range rectangular aluminium downpipe carries rainwater from the roof drainage system down the building to the drainage point. Its rectangular profile provides a consistent finish along the elevation, with matching fittings available to complete changes in direction and connections.

Manufactured from extruded aluminium tube, the pipe combines low weight with rigidity and corrosion resistance. Choose the length needed for the run and use matching brackets to support the installation. This version includes a socket connection for the matching socketed pipe system.

Pipe sizes: 102x76mm. Length options: 0.5m, 1m, 2m, 2.5m and 3m. Available lengths vary by size; use the selector to choose a listed combination. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your guttering, windows and roofline.

Check the selected size and length against your layout, including the space needed for joints and fittings. Keep access available for routine inspection and cleaning.

The AGD Signature Range rectangular cast aluminium collar provides a separate collar component for the matching cast-collar downpipe system. It helps retain the traditional joint appearance when assembling or replacing compatible pipework.

Choose an eared collar with fixing lugs or a non-eared collar without them, according to the installation arrangement.

Pipe sizes: 102x76mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your guttering, windows and roofline.

Match the collar to the nominal pipe size and use the appropriate support and fixing method. Check compatibility before using it with an existing installation from another range.

The AGD Signature Range standard hopper head for rectangular downpipes collects incoming rainwater and directs it into the pipe below. It creates a defined collection point on the building elevation.

The aluminium hopper coordinates with the matching rainwater pipe system. Select the outlet size to suit the downpipe and allow enough space for the incoming discharge. This version includes a cast collar (CC) for the traditional collar joint appearance.

Pipe sizes: 102x76mm. Choose Milled for an uncoated aluminium finish, or one of the 11 listed RAL powder-coated colours to coordinate with your guttering, windows and roofline.

Check the hopper position, outlet connection and drainage capacity against the project layout. Keep the collection opening accessible so leaves and debris can be removed.